Dongguan Anxiang Intelligence Equipment Co., Ltd
High speed visual counting packing equipment manufacturer.
Add to Cart
The following aspects can be considered when choosing a suitable visual screening machine:
Equipment procurement cost: The prices of visual screening machines of different brands and configurations vary greatly. In the case of a limited budget, it is necessary to comprehensively consider the performance and price of the equipment and choose products with high cost performance. Cost-benefit analysis can be conducted by comparing the quotations and product configurations of different manufacturers.
Operation cost: includes the energy consumption of the equipment, the cost of replacing wearing parts, and the cost of maintenance. Some visual screening machines may consume more energy during operation, or require regular replacement of expensive parts, which will increase the operating cost. When choosing, these factors should be fully considered to reduce the long-term use cost.
The system consists of two workstations which contains inner side and outer side, each with six 2-megapixel or 5-megapixel color cameras distributed at a 60-degree Angle. Each camera uses a low-distortion lens. In addition, the system also features two sets of color lighting systems distributed above and below. It has an independently digitally adjustable lighting system to abnormalities on the basis of detecting the inner and outer defects.
Dent is an optical inspection device for dimensional and surface defected detection of round and shaped parts. It can detect rubber, plastic, PTFT and other materials with high precision within its detection range. These materials are tested for defects at a series of inspection using high-precision industrial cameras. The images obtained by the camera are transferred to the computer managed by the real-time system for image processing without data loss and interference: the user can interact with the operating system in a simple and intuitive way through the operating interface. The detection system is stable, reliable, efficient and high-speed.
| Technical Parameter | 35 | 60 | 90 |
| Material | Rubbers, Plastics, PTFE, Hardware | ||
| Color | Any colour | ||
| Minimum Outside Diameter of Inspected Material (mm) | 5 | 5 | 20 |
| Maximum Outside Diameter of Inspected Material (mm) | 35 | 60 | 90 |
| Minimum Thickness of Inspected Material (mm) | 1 | 1 | 1 |
| Maximum Thickness of Inspected Material (mm) | 9 | 9 | 9 |
| Efficiency | Max 36,000pcs/h (Depends on size and material ) | ||
| System | Feeding device 300L | ||
| Measurement Station | 35 | 60 | 90 |
| Camera | Black&White | Black&White | Black&White |
| Inspected Range (mm) | Φ54 | Φ71 | Φ102 |
| Maximum height Inspected (mm) | 10 | 10 | 10 |
| Image Resolution (mm) | 0.001 | 0.001 | 0.001 |
| Measure Precision (mm) | +/-0.008 | +/-0.012 | +/-0.012 |
| Repeatability (mm) | +/-0.005 | +/-0.008 | +/-0.008 |
| Surface Workstation | 35 | 60 | 90 |
| Camera | Full color | Full color | Full color |
| Quantity of Camera | 4 | 4 | 4 |
| Focal length adjustment | Electricity | Electricity | Electricity |
| High Measure and Inspected station | 35 | 60 | 90 |
| Inspected Range (mm) | 25 | 25 | 25 |
| Image Resolution (mm) | 0.001 | 0.001 | 0.001 |
| Measure Precision (mm) | ±0.003 | ±0.003 | ±0.003 |
| Repeatability (mm) | ±0.005 | ±0.005 | ±0.005 |
| Minimum Inspected inside diameter (mm) | 10 | 10 | 10 |
| Outside Inspected Station | 35 | 60 | 90 |
| Camera | Full Color | Full Color | Full Color |
| Single Camera Inspected range(mm) | 29 | 48 | 48 |
| Image Resolution (mm/px) | 0.012 | 0.020 | 0.020 |
| Minimum Inspected Defective area(mm) | 0.036*0.036 | 0.060*0.060 | 0.060*0.060 |
| Inside Inspected Station | 35 | 60 | 90 |
| Camera | Full Color | Full Color | Full Color |
| Single Camera Inspected range(mm) | 29 | 48 | 58 |
| Image Resolution (mm/px) | 0.010 | 0.019 | 0.019 |
| Minimum Inspected Defective area(mm) | 0.030*0.030 | 0.030*0.030 | 0.030*0.030 |
Electronic components, precision injection molding, hardware fasteners,
sealing rings,rubber silicone,industrial silver contacts, etc.
